Thursday, June 14, 2012

Lab 8: Mapping the Station Fire in ArcGIS




The Los Angeles Station Fire of 2009 was the county's largest recorded wildfire in modern history.  The fire burned an estimated 160,577 acres of land, and approximately 80% of the Angeles National Forest was destroyed.  Today, wildfires are even more of a concern, given the increasing popularity of housing development in and around canyons.  Real estate in and around forests boast magnificent views and privacy from the cities they overlook, but often come at a price.  Residential areas encroaching on wildlife can be prone to a number of environmental dangers beyond wildfires. 

In addition to the loss in human life and wildlife, the Station Fire further affected the Los Angeles environment in several ways even after it was contained.  For instance, the canyon areas in and around the fire are prone to landslides after extensive fires like the one of 2009.  After the devastation of large fires, there is no longer enough vegetation present to stabilize the soil, which can lead the topsoil layer to runoff from these canyons.  Furthermore, landslides occur at a slope greater than 24 degrees and can happen suddenly.  Thus, even after the 2009 Station Fire was contained, residential homes around the burn area were still at great risk. 

Furthermore, surface runoff (water flow that occurs when water on the ground surface enters the soil at full capacity) effects are increased by as much as 70% immediately after an extensive fire like the one of 2009.  This water contains contaminants from the fire and ash and can be just as hazardous to nearby communities and environments as the smoke itself.  The water can contain heavy metals such as chromium, copper, lead and mercury, which then floods waterways in the burned watershed.  This polluted water can have major effects on environmental degradation, altering existing wildlife habitats and even possibly residential communities.  After the 2009 Station Fire, communities downstream of the burn area were at high risk of both runoff and landslide effects.

Furthermore, the after effects of a fire also damage roadways in and around burn areas.  After the 2009 fire, the Angeles Crest Highway was closed for over a year, and additional fire roads throughout the forest also suffered severe damages from both the fire and flooding caused by runoff.  These damages cost the City of Los Angeles as well as Federal entities millions of dollars at a time when budgets were already uneasy due to the economic climate.

As the 2009 Station Fire demonstrated, the effects of fires last long after they are contained. Damaging fires can lead to erosion, landslides, flash floods, and the alteration of habitats and environments. 

Works Cited
“InciWeb the Incident Information System: Station Fire News Release.” InciWeb the Incident Information System: Current Incidents. US Forest Service, 26 Sept. 2009. Web. 12 Jun. 2012. <http://inciweb.org/incident/article/9640/>.
“Station Fire.” InciWeb. U.S. forest Service, 15 Sept.  2009. Web.  12 Jun. 2012. <http://inciweb.org/incident/1856/>.
“Station Fire Update Sept. 8, 2009.” InciWeb. U.S. forest Service, 15 Sept. 2009.  12 Jun. 2012. <http://inciweb.org/incident/article/9535/>.
Bloomekatz, Ari  “Station fire is largest in L.A. County’s modern history.”  Los Angeles Times., 2 Sept. 2009.  12 Jun. 2012. <http://latimesblogs.latimes.com/lanow/2009/09/station-fire-is-largest-in-la-county-history.html>.

Monday, May 28, 2012

Week 8 : Mapping Census Data









For this lab, I pulled county-level population data from the 2000 U.S. Census.  I compared three population groups -- Asian, Black, and "Other Race" by county in the United States.  Out of the three groups, the Asian group was the smallest minority group with a 46% maximum percentage in any given county within the United States.  The Percent Asian map indicates that there are higher proportions of Asian populations on the West coast -- particularly in and around dense cities like San Francisco and Los Angeles.  Other metropolitan areas like Houston, Texas and New York, New York also appear to have large populations of Asians.  From this, we can begin to speculate about immigration patterns.  We could also theorize that past and present Asian immigrants were and are drawn to already established ethnoburbs and ethnic enclaves, thus continuing to build to the existing communities.

The Percent Black map indicates that the southern region of the United States has higher proportions of blacks by county.  While there is a moderate number of Blacks in and around the Southern California region, the southern United States yields much higher populations. Some counties in the south like those in Georgia, yield Black population percentages of over 50%.  From this, we can theorize about the history of Black populations in the South and speculate about a possible lack in large population movement after the Civil War.  Also, like with the Asian population, we could potentially study the issue of community and how certain groups are drawn to established ethnic enclaves.

The Percent Other map includes other ethnic groups such as American Indian, Pacific Islander/Hawaiian, and Latino groups such as Mexican, Puerto Rican and Cuban. The map shows that there are large percentages of these "other" ethnic groups in the Southwestern region of the United States.  The large numbers of Mexican immigrants in California and Texas contributes to this concentration.  There is a particularly large percentage in central California, which is probably due to the agricultural industry and the history of Latino migrant workers who have worked within that area. Again, we can speculate about a lack in movement from groups after a historical period of settlement in an area.

I initially thought that this exercise would be difficult, but the tutorial was very clear and helpful.  Working with tables within ArcGIS is more manageable than I thought it would be.  After working with ArcGIS in this class, I know have a better understanding of the kind of spatial data mining and analysis that GIS experts and techs can really do.  Working with Census data and studying population patterns has given me a better understanding of the ways in which ArcGIS tools can be used for not only spatial, but also sociological analysis.

Tuesday, May 22, 2012

Lab 6: 6 DEMS in ArcGIS





Location:

Datum: North American 1983
1: 320,000
Left: -117.1033
Top: 38.889
Bottom: 38.453
Right: -116.295



Friday, May 11, 2012

Lab 5: Projections in ArcGIS





A main challenge for the GIS field is translating three-dimensional features from the world to a flat, two-dimensional surface while still preserving accuracy and relationships of features.  Because three-dimensional features can become distorted when translated to a flat surface, map projections are available to allow for this two-dimensional visualization of the earth.

However, map projections can also distort edges of a given map.  Different projections are used to highlight particular areas or features of interest. For example, Mercator map projections are often utilized to distort a view to convey a certain message.  Mercator maps can be used to exaggerate the size of a country like China to emphasize just how dense the country's population is in relation to neighboring countries.

Conic projections like the Conic Equidistant featured above preserve accuracy of the areas around the poles.  The conformal projections like the Mercator and Gall Stereographic distort the Antarctic region.  Equal area projections retain relative land mass area and only slightly distort features evenly.  More specifically, Antarctica and Greenland are more reasonably sized in relation to other countries. 

When measuring the distance between two cities, like Washington, D.C. and Kabul, Afghanistan above, the distances produced differ with projections.  The Cylindrical Equal Area map projection had a distance output of 10, 108.051 miles, whereas the Conic Equidistant map projection yielded around 6,972 miles.  It is important to be familiar with the many different types of projections in order to assess which projection will work best for your research and mapping needs.  When used correctly, map projections greatly aid in the visual representation and analysis of spatial information.

Friday, May 4, 2012

Lab 4 : Intro to ArcMap


I had never used ArcGIS before this lab, but had heard much about it from friends in the Geography and Civil Engineering fields.  I was initially intimidated by the software because the concepts of map making and spatial analysis are both very new to me.  However, the ArcGIS tutorial provided for this lab was so thorough and easy to comprehend that I found myself getting through the steps just fine.  What I had heard about ArcGIS was fairly limited to its benefits as an analysis tool, so it was really impressive to see the aesthetically pleasing graphics that this software can produce. 

At first, I tried to speed through the tutorial so that I could finish the entire assignment in one lab session, but the mistakes and problems I ran into made me realize just how sensitive this program can be.  ArcMap requires a great deal of precision and control.  For example, if a user forgets that the zoom feature is on, it could instantly distort their graphics.  Additionally, the program did crash on me twice and can take awhile to load, given the level of graphics it works with.  Luckily, because Professor Sheng and my TA Cameran emphasized saving as we worked, I did not lose any material.  

Once I began to take my time and slowly worked through the tutorial, I didn't encounter many issues.  I tried to pay attention to the tips that Cameran provided for the problems I did run into and was able to practice applying them again on my own throughout the rest of the assignment.  I think that with enough practice and a good foundation for applied spatial analysis, beginners like myself can eventually get the hang of ArcGIS.  

One of the most impressive features of ArcGIS is the software's ability to manage multiple map layers.  The use of layers allows for users to compare and contrast many variables for a richer analysis.  This ability combined with the software's graphics makes ArcGIS a very powerful tool for conveying information.  Generally, maps can convey information in a very aesthetically pleasing way that many people find to be intuitive.  Although my experience with ArcGIS has been positive, it was only been made possible through UCLA's Geography department.  The software remains far too expensive for the general public to use if one is not affiliated with an institution of some kind.  While somewhat user-friendly, ArcGIS is ultimately so expensive that it raises barriers to access, making it more of an expert or field-specific tool.  

Tuesday, April 17, 2012

Lab 3 : Neogeography


View The Geography of Modern Family in a larger map

The above neogeography map, entitled "The Geography of Modern Family," highlights major or frequently shown Los Angeles locations featured on the ABC television show, Modern Family.  The placemarks on the map indicate where the three main residences featured on the show are actually located in Los Angeles.  While the family's residence is never explicitly stated in the show, many of the scenes (including the major residences) are shot in West Los Angeles.  Additionally, a few placemarks refer to notable scenes shot in the city, including a college episode filmed at UCLA.

Living in Los Angeles can both jade you to the entertainment business as well as open your eyes to certain aspects like movie and television shooting locations.  After living in Los Angeles for the past six years, I now notice popular locations featured in the background on television shows as well as in movies.  Because of our culture's emphasis on popular entertainment and celebrity idolatry, connecting the fictional with our real lives and physical surroundings can be a great thrill for some.  

Maps like the one featured above are a part of the growing neogeography trend.  In this digital age, anyone with Internet access can now create their own maps through neogeography.  The development of neogeography has contributed to an increase in access to the kind of tools and information that were once limited to experts in the field.  While neogeography's accessibility supports freedom of creativity and use, its open format also has its disadvantages.  With an open Internet technology like this, both experts and amateurs are able to produce content, thus overall reliability and quality of content for maps within neogeography vary greatly.  Additionally, because neogeography is used by the community, it also lacks standards and regulations that more authoritative technology must adhere to.

Saturday, April 14, 2012

Lab 2 : USGS Topographic Maps

1. What is the name of the quadrangle?
 Beverly Hills Quadrangle

2.What are the names of the adjacent quadrangles?
Canoga Park Quadrangle and Van Nuys Quadrangle
source: bottom of BH Quadrangle
 
3.  When was the quadrangle first created?
1966

4.  What datum was used to create your map?
 National Geodetic Vertical Datum of 1929.

5. What is the scale of the map?
7.5 minute 1:24 000
6. a) 5 cm on the map is equivalent to how many meters on the ground?
    1200 meters
     b) 5 inches is equivalent to how many miles on the ground?
     1.894 miles
     c) 3 kilometers on the ground is equivalent to how many cm on the map?
     12.5 centimeters

7. What is the contour interval of your map?
20 feet

8. What are the approximate geographic coordinates (degrees/minutes/seconds and decimal degrees) of:

a) Public Affairs building:

34* 4’ 30” N, 118* 26’ 25” W
34.0750 N, 118.4403 W

b) tip of the Santa Monica Pier:


34* 0’ 45” N, 118* 30’ 0” W
34.0125 N, 118.5000 W

c) Upper Franklin Canyon Reservoir: 

34* 7’ 15” N, 118* 24’ 30” W
34.1208 N, 118.4083 W


9.What is the approximate elevation in both feet and meters of:


a) Greystone Mansion (in Greystone Park)
560ft = 170.69m


b) Woodlawn Cemetery
140ft = 42.67m


c) Crestwood Hills Park
700ft = 213.36m


10. What is the UTM Zone of the map?
UTM 11

11. What are the UTM coordinates for the lower left corner of your map?
3,763,000 N, 3 62,000 E


12. How many square meters are contained within each cell (square) of the UTM gridlines?
1,000,000 m^2


13. Obtain elevation measurements, from west to east along the UTM northing 3771000, where the eastings of the UTM grid intersect the northing. Create an elevation profile using these measurements in Excel (hint: create a line chart). Figure out how to label the elevation values to the two measurements on campus. Insert your elevation profile as a graphic in your blog.




14. What is the magnetic declination of the map?
14* East of North
15. In which direction does water flow in the intermittent stream between the 405 freeway and Stone Canyon Reservoir? 
It flows South.
16. Crop out (i.e., cut and paste) UCLA from the map and include it as a graphic on your blog.